CORDLESS NAILER
Product description
Voltage 20V
Capacity 100 Nails
Compatible with 60012, 60013, 60015, 60016, 60017
Weight 3.60kg
Dimensions (LxWxH) 292x94x259mm
This tool is designed for fastening cardboard, insulating material, fabric, foils, leather, and similar materials onto wooden surfaces or wood-like materials.
It comes equipped with an LED light to indicate the status of the power tool, an LED light for better visibility during operation, a drive selector knob to choose between single and contact actuation modes for more precise or faster firing, and a depth adjustment wheel to set the desired driving depth for nail/staple heads. It also features a belt hook and a soft-grip handle.
In addition, it is equipped with a safety contact pin, which must be pressed against the workpiece before pulling the trigger to fire nails/staples in single-actuation mode, thus acting as a safety mechanism to prevent accidental tool startup.
Voltage: 20V, 2000mAh
Battery capacity: 2Ah/4Ah/6Ah (Li-ion) (not included)
Average firing speed: 60 nails/staples per minute
Maximum firing speed: 100 nails/staples per minute
Maximum magazine capacity: up to 100 nails/staples
Maximum nail length: 50 mm (18-gauge nails)
Maximum staple length: 40 mm (18-gauge narrow crown light-duty staples)
Nail length: 20-50 mm
Maximum nail cross-section width: 1.25 mm
Maximum nail cross-section thickness: 1.05 mm
Staple length: 19-40 mm
Maximum staple crown: 6 mm
Maximum staple cross-section width: 1.2 mm
Maximum staple cross-section thickness: 1 mm
Operating time:
2 Ah battery: 420 staples/nails per charge
4 Ah battery: 800 staples/nails per charge
6 Ah battery: 1200 staples/nails per charge
Dimensions: 292x259x94 mm
Weight: 2.8 kg
LED LIGHT
BELT HOOK
ERGONOMIC SOFT GRIP HANDLE
DRIVE SELECTOR KNOB TO SELECT FIRING MODE
DEPTH ADJUSTMENT WHEEL
LED STATUS INDICATOR
Red LED on = battery is low
Red LED flashing = nails/staples are jammed
Green LED on = no nails in the magazine, power tool is in dry-fire protection mode
Green LED flashing = overheating, power tool is in overheat protection mode
*Battery not included